Parameter WBM-Basic WBM-Pro WBM-Pro HV Art. Nr. 40290310 40290311 40290312 Technical specifications       Supply voltage range 9.35 VDC 9.35 VDC 14.70 VDC Supply current1): @Vin=24VDC 7 mA 7 mA 5 mA (@Vin=48VDC) @Vin=12VDC 9 mA 9 mA 6 mA (@Vin=36VDC) Input voltage range подробнее... (auxiliary battery) 2.35 VDC 2.35 VDC 2.35 VDC Input voltage range (main battery) 0.35 VDC 0.35 VDC 0.70 VDC Input current range 2) -999..+999A -9999..+9999A -9999..+9999A Battery capacity range 20..999 Ah 20..9990 Ah 20..9990 Ah Operating temperature range -20..+50°C -20..+50°C -20..+50°C Readout resolution: voltage ± 0.1V (0. .35V) ± 0.01V (0..35V) ± 0.01V (0..70V) current ± 0.1 A (0..100A) ± 0.1A (0..200A) ± 0.1 A (0..200A) current ± 1A (100..999A) ± 1A (200..9999A) ± 1A (200..9999A) capacity range ± 0.1 Ah (0..1 OOAh) ±0.1Ah(0..200Ah) ± 0.1 Ah (0..200Ah) capacity range ±1Ah(100..999Ah) ± 1 Ah (200..9990Ah) ± 1Ah (200..9990Ah) state-of-charge (0..100%)  ±0.1% ±0.1% ±0.1% time remaining (0..24hrs)   ± 1 mn ± 1 mn time remaining (24..240hrs)   ±1 hr ±1 hr temperature (-20..+50°C)3)   ± 0.5°C ± 0.5°C Voltage measurement accuracy ± 0.3% ± 0.3% ± 0.3% Current measurement accuracy ± 0.4% ± 0.4% ± 0.4% Material of housing ABS ABS ABS Color RAL 7021 black/grey RAL 7021 black/grey RAL 7021 black/grey Dimensions: frontpanel / body diameter Ø 64 mm / Ø 52 mm Ø 64 mm / Ø 52 mm Ø 64 mm / Ø 52 mm total depth / weight 79 mm / 95 gr 79 mm / 95 gr 79 mm / 95 gr Shunt dimensions: footprint 45 x 87 mm 45 x 87 mm 45 x 87 mm height 17 mm (base) / 35 mm 
(high current fasteners) 17 mm (base) / 35 mm 
(high current fasteners) 17 mm (base) / 35 mm 
(high current fasteners) weight 145 gr 145 gr 145 gr Protection class IP20 (frontpanel only IP65) IP20 (frontpanel only IP65) IP20 (frontpanel only IP65) Complies with the following standards EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4- 3), LVD 73/23/EEC (EN60335-1), e4-95/54/EC, RoHS 2002/95/EC 
Note: the given specifications are subject to change without notice. 1) Measured with backlight and alarm relay turned off. 2) Depends on selected shunt With standard delivered 500A/50mV shunt (350A continuous). the range is limited to -600..+600A. 3) Only available when optional temperature sensor is connected.
Features:
-WBM reads your battery bank like a fuel gauge.
-Provides critical information about the status of your battery bank(s).
-Displays voltage, current, consumed amp hours, remaining battery capacity and 'time remaining'.
-Two battery inputs.
-Large backlight LC Display.
-Quick nut mounting construction.
-Fully programmable alarm relay.
-Shunt selection capability enables flexible system integration.
-Communication/expansion port.
-Stores a wide range of historical events in internal memory.
-Splash proof frontpanel.
-500 Amp shunt included.
-CE and e-mark certified.
-24 months warranty.

Art. Nr.    Item 40290300    WBM 6mtr Connection accessory kit 40290301    WBM 12mtr Connection accessory kit 40290303     WBM 3mtr Quick Connection kit 40290304     WBM 10mtr Temperature sensor kit 40290305     WBM-RS-232 Communication kit 40290306     WBM-USB Communication kit 40290307     WBM1:5 Voltage prescaler kit 40290308     WBM Alarm output expander kit 40290320     WBM1200A/50mV shunt 40290321     WBM500A/50mV shunt (included WBM)

GEL Power Part # 40290070 40290071 40290072 40290073 Specifications         Nominal capacity (C20) 100 Ah 145 Ah 180 Ah 225 Ah Nominal voltage 12.0 V-DC 12.0 V-DC 12.0 V-DC 12.0 V-DC Type Deep cycle GEL battery with 12 years подробнее... floating design life. Superior design for frequent cyclic discharge applications under extreme temperatures. Strong grid construction to ensure reliability under frequent deep discharge use. Over 400 cycles possible at 100% DOD. Extra durable cyclic performance, high efficiency of recovery, therefore most suitable for solar, mobility, marine and deep discharge UPS installations. Weight +/- 10% 30.0 Kg 44.0 Kg 53.0 Kg 65.0 Kg Dimensions l*w*h [mm] (excl. terminals) 328*172*222 340*173*280 530*209*214 522*240*219 Terminal type M8 stainless steel Number of cells 6 6 6 6 Charge/discharge parameters Constant voltage Charging (III, float) 
Cyclic Charging (IUU, absorption) 13.60 to 13.80 V-DC @25C 
14.25 to 14.60 V-DC @ 25C Recommended charging current limit (higher possible) 20.0 A 29.0 A 36.0 A 45.0 A Temperature cut-off ratio 4mv/cell/°C Discharge cut off voltage 100% depth of discharge d.o.d. 1.75 V@ (A) <= 0.2 C 
1.70 V @ 0.2 C (A) <= 1.0 C 
1.65 V @ (A) >= 1.0 C Rated Capacity @ 25°C rate to 17.5 V per cell rate to 17.5 V per cell rate to 17.5 V per cell rate to 17.5 V per cell 20 hrs discharge 100.0 Ah 145.0 Ah 180.0 Ah 225.0 Ah 10 hrs discharge 95.0 Ah 136.0 Ah 169.0 Ah 209.0 Ah 5 hrs discharge 84.0 Ah 117.0 Ah 146.0 Ah 181.0 Ah Peukert Coefficient 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 Time reserve minutes 
25 amps discharge 165 minutes 261 minutes 341 minutes 450 minutes Self discharge less than 3% per month @ 25°C Storage time GEL-power batteries can be stored for maximum 6 months at 25°C, Charging recommended before using. Battery parameters Cranking amps @ 25°C (5 sec) 1000 A 1450 A 1800 A 2250 A Cycle life at 80% of D.O.D 600 600 600 600 Internal resistance Approx. 7.5 MΩ 5.0 MΩ 6.0 MΩ 4.0 MΩ

AGM Power Part # 40290060 40290061 40290031 40290062 40290063 40290064 Specifications             Nominal capacity (C10) 55 Ah 80 Ah 100 Ah 145 Ah 200 Ah 260 Ah Nominal voltage 12.0 V-DC 12.0 V-DC 12.0 V-DC 12.0 V-DC 12.0 V-DC 12.0 V-DC Type Deep cycle Absorbed подробнее... Glass Mat battery with 10 years floating design life, specially designed for frequent cyclic discharge usage. By using strong grid and specific paste plate, gives the battery 30% more cyclic life. Applicable for marine, mobile and PV energy systems and as an engine starter battery. Weight +/- 10% 18.0 Kg 24.0 Kg 30.0 Kg 44.0 Kg 60.0 Kg 74.0 Kg Dimensions l*W*h [mm] (excl. terminals) 229-138*210 350*167*180 328*172*222 340*173*280 522*240*219 520*268*220 Terminal type M8 stainless steel Number of cells 6 6 6 6 6 6 Charge/discharge parameter Constant voltage Charging (III, float)
Cyclic Charging (IUU, absorption)    13.60 to 13.80 V-DC @ 25C 
14.25 to 14.60 V-DC @ 25 C Recommended charging current limit (higher possible) 16.5 A 24.0 A 30.0 A 44.0 A 60.0 A 78.0 A Temperature ratio 4mv/cell/°C Discharge cut off voltage 100% depth of discharge d.o.d.    1.75 V @ (A) <= 0.2 C 
1.70 V @ 0.2 C (A) <= 1.0 C 
1.65V @ (A) >= 1.0 C Rated Capacity @ 25°C rate to 1.75 V per cell rate to 1.75 V per cell rate to 1.75 V per cell rate to 1.80 V per cell rate to 1.80 V per cell rate to 1.80 V per cell 20 hrs discharge 58.6 Ah 85.3 Ah 104.0 Ah 167.0 Ah 226.0 Ah 278.0 Ah 10 hrs discharge 55.0 Ah 80.0 Ah 100.0 Ah 145.0 Ah 200.0 Ah 260.0 Ah 5 hrs discharge 44.5 Ah 65.0 Ah 89.0 Ah 131.0 Ah 180.0 Ah 220.0 Ah Peukert Coefficient 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 1.21<P<1.24 Time reserve minutes 
25 amps discharge                        92 minutes 146 minutes 190 minutes 305 minutes 455 minutes 630 minutes Self discharge less than 3% per month @25°C Storage time AGM-power batteries can be stored for maximum 
6 months at 25°C, Charging recommended before using.    Battery parameters Cranking amps @ 25°C (5 sec) 550 A 800 A 1000 A 1450 A 2000 A 2600 A Cycle life at 80% of D.o.D 400 400 400 400 400 400 Internal resistance Approx. 6.0 MΩ 5.5 MΩ 5.0 MΩ 4.5 MΩ 4.0 MΩ 3.5 MΩ

   

OPzV 2 Volt GEL Power Art. Nr. 40290040 40290041 40290042 40290043 40290044 Specifications           Nominal capacity (C10) (1.8 V cell, 20°C) 600 Ah 800 Ah 1000 Ah 1200 Ah 1500 Ah Nominal voltage 2 V-DC 2 V-DC 2 подробнее... V-DC 2 V-DC 2 V-DC Type WhisperPower OPzV Valve Regulated batteries are extremely suitable for applications with extended charge / discharge cycles. 
They are fully maintenance free. WhisperPower GEL power batteries are based on tubular plate technology and the fixing of the electrolyte as GEL. 
Typical applications include reserve power supplies for backup power, marine / mobile power banks and safety power supply equipment. Weight +/- 10% 50.0 Kg 68.0 Kg 82.0 Kg 97.0 Kg 120.0 Kg Dimensions l*w*h [mm] (inci. terminals) 145*206*667 191*210*668 233*210*670 275*210*669 275*210*820 Terminal type M 10 / 2 M 10 / 4 M 10 / 4 M 10 / 4 M 10 / 4 Number of plates per cells 6 8 10 12 12 Charge/discharge parameter Boost Charge Voltage (V/cell) 
Floating voltage set point (V/cell) 2.35 V DC @ 20°C
2.25 V DC @ 20°C Initial charge current (A) 0.4 C10 240 A 320 A 400 A 480 A 600 A Temperature cut-off ratio 4mv/cell/°C Recommended End of Discharge voltage for 10-hr rate (V/cell) 
Recommended End of Discharge voltage for 1 -hr rate (V/cell)    1.80 V/cell 
1.65 V/cell Rated Capacity @ 20°C rate to 1.80 V per cell rate to 1.80 V per cell rate to 1.80 V per cell rate to 1.80 V per cell rate to 1.80 V per cell 10 hrs discharge 600 Ah 800 Ah 1000 Ah 1200 Ah 1500 Ah 5 hrs discharge 580 Ah 780 Ah 965 Ah 1160 Ah 1360 Ah 1 hrs discharge 292 Ah                 613 Ah 489 Ah 570 Ah 647 Ah Peukert Coefficient 1.21 1.21 1.21 1.21 1.21 Time reserve minutes 25 amps discharge 24 hrs 32 hrs 40 hrs 48 hrs 60 hrs Self discharge less than 2% per month @ 20°C Storage time OPzV-power batteries can be stored for maximum 6 months at 20°C, Charging recommended before using. Battery parameters Short circuit current of the battery cell (A) 4170 A 5840 A 7170 A 8540 A 9360 A Cycle life at 80 % of D.O.D 1250 1250 1250 1250 1250 Internal resistance Approx. 0.49 mΩ 0.35 mΩ 0.29 mΩ 0.24 mΩ 0.22 mΩ